Here is everything you need to get started with your VOIP service, using your own equipment. (If you’re using a SkyMesh-supplied router or ATA, click here to see a list of supported equipment in our knowledge base, then select the router or ATA you’re using.)
You’ll need to enter the following details into your VOIP-compatible router or ATA (Analog Telephone Adapter).
VOIP Phone Number: Use the SIP USERNAME from your welcome email. VOIP User Name: Use the SIP USERNAME from your welcome email. VOIP Password: Use the SIP PASSWORD from your welcome email.
VoIP Server (incoming and outgoing Proxy): Use the SIP SERVER from your welcome email. SIP Port: Use the SIP PORT from your welcome email. SIP Protocol: Use the SIP PROTOCOL from your welcome email. Preferred Codec: G711u RTP packet size: 0.020 SIP ToS/DiffServ Value: 0xb8
Registration Expiry: 120ms Proxy Fallback: 120ms
Copy and paste the appropriate Dial plan into the ‘Dial Plan’ section of your ATA.
Your dial plan starts and ends with (brackets), and should not contain leading or trailing spaces: