Call now: 1300 759 637

Upgrade to superfast nbn™ Fibre to the Building (FTTB) for FREE!

Fibre optic is the latest advancement in broadband technology and provides super-fast internet straight to your building.

With SkyMesh there aren’t any hidden setup or activation fees, all you pay for is your chosen monthly Fibre to the building plan, plus any chosen optional extras. Unmetered Netflix is included as standard.

Join tens of thousands of Australians who trust SkyMesh to deliver their broadband service. Check your building’s address and upgrade to FTTB now!

Upgrade to superfast nbn™ Fibre to the building (FTTB) for FREE!

Fibre to the Building Plans from $29.95

Check your address

nbn™ is the new Australian broadband network. It’s super fast and affordable. See if you can upgrade now.

Great news, {technologyName} is available at your address.
Select a plan to reserve your FREE standard installation now.
{technologyName} is not available at your premises.
{availableTechnology} is either planned or available now.
Reserve your FREE standard installation now.
{technologyName} has not been rolled out to your premises yet.
Enter your email address to be notified when it does

could not be matched.

Please enter your details below so we can manually check your address:

...or check a different address.

Unmetered Netflix

Stream all your favourite shows without worrying about your monthly bill. Available on Fixed-Line services.

Popular Fibre to the Building Plans

1. Select contract length

2. Select speed tier

For help choosing the best speed tier, see here. For factors affecting speeds, including congestion on the nbn™ network, see here.

3. Select plan

All our FTTB plans include great features:

Unmetered Netflix (Australian peered usage isn’t counted!)

FREE Australian, 7 days per week, nbn co accredited technical support.

No hidden activation, setup, delivery, installation or cancellation fees.

Unlimited plan changes (up or down in speed/data).

Choice of boosters for faster uploads or extra data.

Sticky IPv4 address and IPv6 ready.

Important Information

About the technology

nbn™ Fibre to the Building (FTTB) technology is generally used by nbn co when it connects an apartment block or similar types of building to the nbn™ network. nbn co runs a optical-fibre cable to the building communications room. It then uses copper-based VDSL2 technology in the building to connect to each apartment. You need to install a compatible VDSL2 modem inside your premises.

Getting connected

If nbn co has already installed all of the connecting equipment required to successfully connect your premises to the nbn™ network, your new SkyMesh service will typically be activated within 2 Business Days of us processing your application. Applications are processed by us as soon as possible upon receipt but some may take longer than usual.

Otherwise nbn co will arrange for one of its technicians to install the equipment. If an appointment is required, nbn co will typically install the equipment within 10 Business Days. Once installed, we’ll then need to activate your new SkyMesh service and this typically happens within 1 Business Day.

nbn co’s Initial Standard Installation Charge

nbn co’s Initial Standard Installation Charge is currently $0 (free).

nbn co’s Subsequent Installation Charge

nbn co’s Subsequent Installation Charge is currently $297 plus labour and materials. This charge applies if:

  • a new copper pair needs to be installed by nbn co; or
  • a jumper cable needs to be installed by nbn co and: the premises does not have an existing voiceband/non-voiceband service; or the premises does have an existing voiceband/non-voiceband service but you choose not to transition it.
nbn co’s Service Transfer Charge

nbn co’s Service Transfer Charge is currently $24.75. This charge applies if you transfer (churn) your service from your existing nbn™ network service provider to SkyMesh. We currently absorb this charge and do not pass it on to our customers.

nbn co’s New Developments Charge

In line with the Australian Government’s Telecommunications Infrastructure in New Developments Policy, nbn co implemented the New Developments Charge on 2 April 2016. A premises identified by nbn co as a New Development Location is subject to nbn co’s once-off New Developments Charge if the premises has never had an active nbn™ service. Despite its name, the New Developments Charge also applies to New Development Locations that were built years ago. It even applies to premises where nbn co has already installed the equipment necessary to connect the premises to the nbn™ network.

The New Developments Charge does not apply if there has been already been an active nbn™ service connected at the premises, and it doesn’t apply if the premises hasn’t been identified by nbn co as a New Development Location.

IPv4 and IPv6 Connectivity

Your service will be assigned a single, public, IPv4 address and a /56 pool of IPv6 addresses. Each requesting router or MAC address is assigned a /60 prefix of IPv6 addresses from that pool. All IP address assignments are fixed but we reserve the right to change assignments for capacity management from time to time.

Typical busy period speed

In accordance with the Telecommunications (NBN Consumer Information) Industry Standard 2018, the typical busy period (7–11pm) download speed that the average consumer can expect to receive is:

  • For Basic Evening Speed Plans, 9 Mbps;
  • For Standard Evening Speed Plans, 20 Mbps;
  • For Standard Plus Evening Speed Plans, 40 Mbps; and
  • For Premium Evening Speed Plans, 80 Mbps;
Factors affecting speed

The speed of your service may be affected by a range of factors:

  • Hardware: the inherent performance of your computer and other network equipment such as your modem, router or access point; and the length and quality of your cabling.
  • Software: the configuration of your operating system, network stack, online application and network equipment such as your modem, router or access point.
  • Electromagnetic interference: noise from other Wi-Fi networks, faulty power supplies or other faulty equipment may interfere with your own Wi-Fi network.
  • Overutilisation: too many active devices sharing your service can result in your devices being starved of enough bandwidth to operate properly.
  • Congestion: peak traffic in the evenings and Distributed Denial of Service attacks.
  • Faults: equipment failures, backhaul fibre cuts, undersea cable breaks and routing issues can affect the flow of local and international traffic.
  • Content: third-party content servers may only allocate you with a limited amount of bandwidth.
  • Overheads: depending on the network protocols that you use, a percentage of your service bandwidth may be used for the transfer of non-payload data.

Please note that the actual effect of all of these factors on your service may not be ascertained until after the service is activated.

Estimated Service Speeds

Sometimes we are asked to estimate the speed of a new service before it has been provisioned. Please note that any estimated speed provided by SkyMesh is based on certain assumptions made by nbn co and is an indicative estimate only. SkyMesh does not represent or warrant that the estimated speed is complete or error-free. As such, it must not be relied on as an accurate measure of the Line Rate, Information Rate or Peak Information Rate that might actually be experienced. Moreover, estimated speeds only refer to the Line Rate, Information Rate or Peak Information Rate of your service. They do not refer to TCP throughput as reported by the SkyMesh speed test. As described above, the Information Rate that you experience will actually be higher than the TCP throughput reported by the speed test.

Line Rates for VDSL2 Services

The Line Rate defines the actual bit rate at which the physical interface will transfer data. The Line Rate sets the maximum bound on the information-carrying capacity of the link. Please note that the Line Rate may exceed the line rate required to support the PIR.

The Line Rate achieved at your premises will depend on:

  • The copper pair line length and attenuation, including in building cabling or lead-in length;
  • The state of copper wiring in-building or in the premises;
  • The number of other data services that share common network cable runs;
  • Framing overheads, asynchronous operation and the impact on bandwidth efficiency;
  • The presence of pre-existing exchange based services, for example ADSL, within a cable run and the use of Downstream Power Back-off; and
  • G.INP retransmissions.

We recommend choosing a plan with a Peak Information Rate that isn’t significantly higher than the best Line Rate that you can achieve at your premises. For example, if the best Line Rate for your premises is 45/15 Mbps, choosing a plan with a Peak Information Rate of of 50/20 Mbps is more appropriate than one with a rate of 100/40 Mbps.

Exceeding your Data Allowance

If you exceed your Anytime (Normal) Data Allowance during a Billing Period, your Peak Information Rate (PIR) will be reduced for the remainder of that Billing Period, except during Off Peak Hours if you have remaining Off Peak (Bonus) Data available.

A reduction in your PIR will affect all network traffic, including any unmetered content such as Netflix. The reduction and subsequent restoration of your PIR do not occur instantaneously and may take over an hour to be effected by our systems.

The PIR is reduced to 256/256 kbps except for plans with Basic Evening Speed or Standard Evening Speed where the PIR is reduced to 128/128 kbps instead.

We do not charge for Excess Data Usage.

Power outages

nbn co does not offer a battery backup service for end users on the nbn™ FTTB network. Therefore, during mains power disruptions, you will not be able to use your service or make emergency phone calls with it.

We strongly recommended that you always ensure you have ability to make emergency phone calls. Keeping a charged mobile phone close by may be one way of maintaining that ability.

Device compatibility

The rollout of the nbn™ network involves new technologies. Some of your existing devices may rely on legacy technologies and may not work with the technology that nbn co chose to roll out in your area.

It’s important to contact each device provider to discuss your needs and find out whether your devices can be migrated to the nbn™ network and, if not, what alternatives may be available.

SkyMesh does not provide support or compatibility information for specialised devices and services such as: medical alarms, autodiallers and emergency call buttons; monitored fire alarms; security monitoring systems; teletypewriter devices and EFTPOS terminals.

If you use a medical alarm, we recommend that you register it on nbn co’s website.

Priority assistance

If you need standard telephone service but have a life-threatening medical condition, or live with someone that does, please seek a provider that can offer you a service with Priority Assistance. SkyMesh does not offer standard telephone services with Priority Assistance but you can obtain such a service from Telstra Corporation Limited.

Switch off

The legacy copper network in nbn™ Fibre to the Building areas will be switched off due to the rollout of the nbn™ network.

Moving to the nbn™ network is not automatic so all of your services affected by the switch off will be permanently disconnected if you do not arrange to migrate before the disconnection date advised by nbn co. Please see nbn co’s website at for more information about the switch off.

Speak with an Australian nbn™ sales advisor
Call now: 1300 759 637