Current Address:
Firmware for Mercku M2

Download the Zip File by clicking the link: M2-M2R2-fw-v2.0.2_0002

Folow these 7 steps to install your firmware successfully:

Step 1: The downloaded file should appear at the bottom left or the top right of your screen, or it will go directly to the ‘Downloads’ folder on your computer.

Chrome

Firefox

Step 2: Open the Zip file, right click on the MA file, then click ‘Copy’

Step 3: Go to your Desktop and right click / paste the file there (or into another folder of your choosing)

From a computer that is connected to your WiFi router via WiFi or Ethernet, go to mywifi.mercku.tech

Step 4: Login using the Admin password. This should be at the bottom of you Mercku router or on the card that came with your router, below the WiFi password.

Step 5: Go to the ‘Upgrade Firmware’, then select ‘Offline Update’

Step 6: Drag and drop your MA file into the Upload section

Step 7: Select the firmware that will be used and click on the ‘Upgrade’ button.

Step 8: Wait until it’s loaded and you should be fine.

The router will reboot during the process and may take up to 10 minutes.

Close

Check your address

See what’s available at your property